Description
Upgrade Taranis Loudspeaker for Frsky Q X7 / X9D / X9D Plus and X9DP SE Radio Transmitter
Testing Video:
Specification:
Item Name: Taranis Loudspeaker
Version: X9D & X9D Plus Version (compatible with Frsky X9D/ X9DP and X9DP SE)
Q X7 Version ( compatible with Frsky Q X7 Radio Transmitter)
Magnetic Circuit Form: External Magnetic Type
Size ( Including the Fixing Base):
32 (Dia.) x 30 (H) mm X9D Version;
65 (L) x 50 (W) x 22 (H)mm Q X7 Version
Weight: 18.34g ( X9D Version)
23.04g ( Q X7 Version)
— More Louder than original speaker
Upgrade Steps:
For X9D Version
1. Take out the Tarnais Radio battery. Notice: When you are using the Radio Transmitter, you must turn off it.
2. Take off the 6 screws on the back of Radio and then open the case, you would see the original speaker
3. Then cut off the power cable ( 1, 2) the following photo showed. Then take out the speaker.
3. Use the heat glue on the fixing base like the following photo showed.
4. Put the new upgrade speaker into the former place and connect the power cable well.
5. Cove the case back and screw tight. Finish.
For Q X7 Version:
Because the mounting space is very small, we need use the fixing base to
fix the upgrade speaker into Card Solt on the back of Q X7 Radio Transmitter.
1. Take out the Tarnais Radio battery. Notice: When you are using the Radio Transmitter, you must turn off it.
2. Take off the 4 screws on the back of Radio and then open the case, you would not see the original speaker like X9D Version,
which was covered by the circuit board.
3. Don't need took out the original speaker. Just need take off the power cable (1, 2 showed in the following photo)
4. Put new upgrade speaker's power cable into the original speaker place from the back side. Pls look at the following photo.
5. Then cover the case and tight screws. Finish.
Package Included:
1x Upgrade Taranis Loudspeaker
1x Fixing base ( was fixed well on the speaker out from factory)
