Description
Matek BetaFlight F405-AIO Flight Controller Built-in PDB Matek 5.8G Video Transmitter VTX-HV
Specification:
Matek F405-AIO (User manual):
Brand name: Matek Systems
Item name: BetaFlight F405-AIO
PCB: 2.3MM, 6 layers & 2oz copper
Size: 36x51mm PCB with 30.5mm mounting holes & XT60 socket
Weight: 12g
FC:
MCU: 168MHz STM32F405
IMU: 32K ICM20602 accelerometer/gyro (SPI)
Max. 32K Gyro update & 16K PID Loop
OSD: BetaFlight OSD w/ AT7456E chip
Blackbox: MicroSD card slot (SD/SDHC)
VCP, UART1, UART2, UART3, UART4, UART5
Built in inverter for SBUS input (UART2-RX)
PPM/UART Shared: UART2-RX
SoftSerial on S5 & S6 optional
Smartaudio & Tramp VTX protocol supported
Spektrum BIND_PIN: RX4
WS2812 Led Strip : Yes
Beeper : Yes
RSSI: Yes
PDB:
Input: 9~27V (3~6S LiPo) w/TVS protection
PDB: 4x30A (Max.4x50A), 6 layers*2oz copper PCB
Dual BEC: 5V 2A & 9V 2A
LDO 3.3V: Max.300mA for Spektrum RX
Current Sensor 200A (Scale 165)
Battery Voltage Sensor: 1:10 (Scale 110)
Matek 5.8G VTX-HV(user manual):
Input voltage: 7~27V(2~6S LiPo)
40 standard channels, A/B/E/F/R Band
Output Power: 25, 200, 500mW switchable
BEC Output: 5V/1A for Camera or FC
Traditional button LED control of frequency and power
BFCMS control via FC UART _TX
Firmware upgradeable
Power Consumption: 3.1W Max. @ 500mW
Video Input Impedance: 75 Ohm
Audio Subcarrier Frequency: 6.5 MHz
RF Connector: U.FL (IPEX)
Video Format: NTSC/PAL
Weight: 6g (Tx only, w/o SMA cable)
Size: 36*22*6.5mm w/30.5mm mounting
Package included:
1x Matek Systems BetaFlight F405-AIO
1x Rubycon ZLH 35V/470uF (Low ESR)
4x M3 Anti-vibration Standoffs
1x FR4 PCB Plate 36*36*1mm
1x 5.8G Video transmitter
1x IPEX to SMA Female, RG178 cable 10cm
1x IPEX 5.8G whip antenna, RG178 10cm
1x PVC Heat-shrink tube
