Description
Hobbywing XRotor Omnibus F4 Flight Controller Built-in OSD Support DShot1200 TF-Card Insertion
Diagram Picture:
Specification: (Manual)
Brand Name: Hobbywing
Model: Rotor F4
Item Name: Omnibus F4 Flight Controller Bulit-in OSD
MCU: STM32 F405 MCU
MPU: MPU6000 SPI Sensor
Firmware Version: OMNIBUSF4SD
Size: 35x35mm
Mounting Holes: 30.5×30.5mm
-Support PWM, Oneshot42, Oneshot125, Multishot,
Dshot150, Dshot300 and Dshot600
-Compatible with PPM, Spektrum, SBUS, SUMD, SUMH, XBUS,
IBUS, JETIEXBUS, CRSF and SRXL Transmitter
Features:
-STM32 F405 MCU allows the FC to run the PID looptime and gyro with higher frequency.
-SPI Sensor MPU6000 includes an accelerometer and a gyro.
-Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via
the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
-The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software
is more applicable to FPV race.
-TF-card which can record and save more flight/back box data allows users to adjust the setup of
their aircraft easily.
-Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM
and etc.
-LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
-Volt/Amp monitoring port allows users to check the battery voltage ( VBAT port ) and current
(CRT port ) (extra current meter is needed).
-Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing
the flight status of the aircraft.
-Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters.
-Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via
the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)
-The FC which supports Betaflight firmware & allows parameter adjustment via Betaflight software
is more applicable to FPV race.
-TF-card which can record and save more flight/back box data allows users to adjust the setup of
their aircraft easily.
-Compatible with various receivers like SBUS, SUMH, SUMD, SPEKTRUM1024/2048, XBUS, PPM
and etc.
-LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
-Volt/Amp monitoring port allows users to check the battery voltage ( VBAT port ) and current
(CRT port ) (extra current meter is needed).
-Buzzer output port allows users to connect external buzzer(s) to the FC for warning or informing
the flight status of the aircraft.
-Micro USB port allows users to connect the FC to a PC to flash firmware and adjust parameters.
Package Included:
1x F4 Flight Controller
