FMS 1300mm PA-18 Super Cub with Reflex V3 EPO RC Airplane PNP/RTF

Description

Description:

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.

The FMS 1700mm PA-18 was launched in 2019, and its stable, easy-to-fly and easy-to-operate features have brought full surprises to both new and old pilots. While this trainer has been widely praised, FMS has been constantly asked whether it is possible to reduce the size of the aircraft, including the aircraft itself and the packaging, while maintaining its stability and operating controllability as much as possible, so that it can be picked up like a boarding suitcase.

With the 1300mm PA-18, FMS has answered the above question. The 1300mm PA-18 also adopts a two-section main wing and horizontal stability structure, but at the same time, the fuselage is also two-section, which greatly facilitates players’ transportation and carrying. It can be hidden in the corner of a car trunk, ready to be used at any time.

Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized pneumatic rubber tires- the 1300mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.

In addition, the assembly steps of the 1300mm PA-18 are still simple and convenient, and the assembly and disassembly of the entire aircraft can be completed with just a few screws.

For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.

The latest 1300mm PA-18 could be a great start to enjoying versatile, fun and exceptionally relaxing flight.

Features:

1. Powerful 3536-850KV motor with 40A ESC provides adequate thrust for any situation.

2. CNC metal landing gear structure for less-than-perfect landings.

3. Oversized pneumatic rubber tires for all-terrain operations.

4. STOL capable (Takes off in less than 3m/10ft)

5. Preinstalled navigation lights

6. Two-section fuselage

7. Two-piece wing and horizontal stabilizer for easy transportation

8. High-strength carbon fiber wing spars

9. Screw-together assembly

10. Large battery bay

11. Preinstalled ball-linked pushrods for increased precision

12. Tough two-blade nylon propellers

13. Functional flaps

14. Optional floats

Specification:

Brand Name: FMS

Item Name: 1300mm PA-18 Super Cub 

Wingspan: 1300mm /51.2in

Overall Length: 986mm /38.8in

Wing Load: 48g/dm² (0.096oz/in²)

Wing Area: 30 dm² ( 464.7sq.in)

Flying Weight: Around 1450g

Motor Size: 3536-KV850

ESC: 40A

Servo: 9g*6

Recommended Radio: 6CH Channel

CG (center of gravity): 60-70mm(From Leading Edge)

Prop Size: 11*7

Recommended Battery: 11.1V 2200mAh 25C

Aileron: Yes

Elevator: Yes

Rudder: Yes

Flaps: Yes

Retracts: No

Approx. Flying Duration: 5minutes

Minimum Age Recommendation: 14+

Assembly Time: 10minutes

Notes to buyers:

RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.

PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included.

Glue is not included in any version.

English Manual, Click Here

PNP Verison Included:

1x FMS 1300mm PA-18 Super Cub Airplane

1x Motor

1x ESC

6x Servo

1x Prop

RTF Verison Included:

1x FMS 1300mm PA-18 Super Cub Airplane

1x Motor

1x ESC

6x Servo

1x Prop

1x Remote Control Mode 2

1x Receiver

1x Battery

1x Charger