iFlight Nazgul5 V3 Analog 240mm 5 Inch 6S Freestyle FPV Racing Drone BNF/PNP RaceCam R1 Cam BLITZ F7 E45S 45A ESC 2207 1800KV Motor

$323.99

CHECK PRICE

Description

v3 Diffirence:

– change the frame kit into v3 version ( like photos showed)

– change the vtx into BLITZ 1.6W VTX

V2 Version new V3 Version

Nagul5 v2 frame Kit

Wheelbase:   240mm*240mm
Body size: 170*170mm

Nagula XL5 v3 frame kit

Wheelbase: 245士2mm

Size: 173*173*37 士2mm

SucceX Force 5.8g 800mW VTX Adjustable

– Item: SucceX-Force 800mW adjustable VTX
– Output voltage/ Max current: 5V 1A
– 12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW，250mA@500mW, 380mA@800mW
– Output 48 frequency points, 
– size:36*36*3mm
– PIT/25mW/200mW/400mW/800mW

BLITZ 1.6W VTX 

Input voltage: 7V～36V 
Interface: MMCX
Power levels: PIT/25mW/400mW/800mW/1600mW
Channels: 40 (including Raceband)
Mounting pattern: 30.5×30.5mm/Φ3 
Lightweight: 18.9g (excluding antenna)
VTX telemetry: IRC Tramp
Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight!
RC Tramp VTX table values: 25/400/800/1600mW

V3 Features:

– Comes with BLITZ 1.6W VTX , high power, strong anti-interference

– CNC integral molding aluminum alloy lens brackt, the material is light and hard, more durble

– Lightweight design, using carbon fiber material, light material, high hardness, and the fuselage is more resistant to explosion.

 – The center of gravity of the fuselage is low, the flight is more stable, and freestyle more easily

– Increase the anti-sparking module to prevent sparks caused by plugging in the battery and prolong the life of the battery plug.

– Compatible with Gopro5/6/7/8/9/10/11, DJI Action. ( NOT Included.)


Specification:

BLITZ F7 Flight Controller

 ( Separate FC Link)

MCU: STM32 F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g

BLITZ E45S 4in1 ESC 

( separate ESC Version to know more details )

Input oltage: 2-6S
Firmware: QH-40 16.7
Continuous current: 45A
Instantaneous current: 55A
MCU:BB21
Current sensor: yes scale 200
Drive signal support: DShot150/300/600MultiShot.OneShot
Weight: 15g

XING-E Pro 2207 1800KV 6S Brushless Motor

( Separate Motor click here)

 KV: 1800KV
Input Voltage: 3-6S                       
Configuration: 12N14P
Stator Diameter: 22mm
Stator Length: 7mm
Shaft Diameter: 5mm
Motor Dimension: 28.5×19.7mm (Dia*Len)
Weight: 33.8g
Idle Current(10) @10V:  less than 1.2A                                     
Max. Con. Power (180S): 845.3W
Internal Resistance:  81.5mΩ
Max. Current (180S): 35.22A



Before Caddx Ratel camera changed to RaceCam R1 Mini Cam.

 ( RaceCam R1 is the same as the Caddx Ratel camera, but changed the brand LOGO )

Frame Spare Part , Click Here

PRODUCT DESCRIPTION

Nazgul5 V2 is a 5′ size BNF (Bind-and-Fly) quadcopter. it is updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don’t worry, get some spares with your order and easy-swap out in field. Wanna strap your for GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Tips:

VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you’re flying legal frequencies and use our prepared Betaflight VTX tables according to your region.


Specification:

  • BLITZ F7 & BLITZ E45S 45A flight stack
  • XING-E 2207 FPV Motor （6S 1800KV )
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 393.4g (without battery)



Feature:

– 5mm arm design for more durability

– LED illuminated Logo

– XING-E 2207 motors and NAZGUL 5140 props
– 5′ version also fits 5.1′ style propellers
– Popular True-X configuration
– TPU crash-guards
– Fits both 30.5x and 20x stacks


Package Included:

  • 1x Nazgul5 V2 240mm 5 Inch 6S FPV Racing Drone
  • 1x RaceCam R1, 2.1mm lens 19x19mm camera
  • 1x Albatross RHCP SMA 5.8g antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 – Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


Additional Suggested Parts (Not Included)

  • Battery 6S 1300mAh
  • Camera mount for GoPro


FACTORY SETUP and WIRING DIAGRAM:

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.

Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

Additional information

Weight 0.78 kg

Related products

iFlight Nazgul5 V3 Analog 240mm 5 Inch 6S Freestyle FPV Racing Drone BNF/PNP RaceCam R1 Cam BLITZ F7 E45S 45A ESC 2207 1800KV Motor
$323.99