Eachine Wizard X220S FPV Racer RC Drone Omnibus F4 5.8G 40CH 30A Dshot600 2206 2300KV 800TVL CCD ARF

$219.99

CHECK PRICE

Description

NOTICE:
Upgrade in new version.
1. Upgrade in new F4 Flight Controller with 9V 5V BEC Output
2. Upgrade in new 60A BL_S 4in1 ESC
3. Don’t have Side Protection Plate anymore

Dear customers,
 
Attention please.
The flexible glue anti-vibration motor pad may cause the motor to slip, please check and tighten the screws before flying.
 
Best regards,
Banggood 
   


Description:


New Version Old Version
Flight Controller

Model:F4DUALBEC8MOTOR0616

Main Chip:  STM32F405  

Gyro: MPU6000  

Barometer: BMP280  

Blaxkbox: 16M  

Motor Output: 8   

Size: 37x37mm

Mounting Hole: 30.5×30.5mm 

BEC Output: 9V, MAX. 2A ; 5V Max.3A 

Omnibus F4 V3 flight controller

Size: 36x36mm
Mount holes: 30.5×30.5mm

STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time. 
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI. 
SBUS/PPM input (Pinheaders)
6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders)
With barometer
SPI Sensor MPU6000
Included 128Mbit Flash, please always use BEC for the FC.
Supported by BETAFLIGHT and dRonin
ESC

Con. current: 60A
Peak current (10S): 70A
Input  voltage: 2-6S
Firmware: blheli_s
Size: 37×42.7mm

Mounting Hole: 30.5×30.5mm

Notice: iF use in 6S, Must solder the capacitor, which is included in package. 

Eachine 30A BLHELI_S  4 in 1 ESC

Con. current: 30A
Peak current (10S): 35A
Input  voltage: 2-5S
BEC: 5V output
Programming: YES
Firmware: blheli_s
Weight: 28g
Size: 36*36MM




Item Specification
Eachine Wizard  X220S Wheelbase: 220mm
Frame arm: 4mm carbon fiber
Weigh: 356g (without battery and camera mount)
Take off weigh: 561g

3K carbon fiber frame kit, 4mm thickness and 15mm width frame arms, the width is 10mm less than Eachine Wizard X220.
Frame kit with camera angle scale and 30° camera mount for Runcam 3 for Gopro session. 
Anti-vibration sponges to protect the racer frome crashing.
 
Eachine  MN2206 2300KV motor
KV: 2300
Max thrust: 1100G
Length: 35MM
NO.OF cell: 3-5S
Diameter: 28MM
Framework: 12N14P
Shaft: 5mm
Propeller: 5 inch
Weight: 28g
 
Eachine 1179 800TVL CCD camera  Color: purple

Sensor: CCD
Resolution(horizontal center): 800TVL
Shell size: 25mm*25mm
Weight: 11g
Resolution: PAL: 1980H×1080 (2MP)
Format: PAL
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
AWB: ON/OFF
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) – 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: internal synchronization
Lens: standard 2.8mm lens 
Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
Workig current: 70mA (low power consumption)
Workig temperature: -20℃–60℃
Humidity: 0%~98% 

Strong backlighting effect
 
5.8G 40CH 25MW 200mw 600MW

switchable transmitter
 Video Format  : NTSC/PAL
Channel: 40CH
Operating Temperature : -10~85℃

Connector: RP-SMA Female
Antenna connector: RP-SMA Male
Eachine 5051 3-blade propeller Color: Send Randomly
Quantity: 10 Pairs
Mounting Hole: 5mm
 


This is the ARF version that comes without battery, charger, receiver and remote control.

Package included:

1 x Eachine Wizard X220S frame kit
2 x 2206 2300KV motor CW 
2 x 2206 2300KV motor CCW
1 x Eachine 30A BLHELI_S  4 in 1 ESC
1 x Omnibus F4 V3 flight controller
1 x 1179 800TVL camera 
1 x 5.8G 40CH 25MW 200mw 600MW switchable VTX

10 x Eachine 5051 3-blade propeller purple CW
10 x Eachine 5051 3-blade propeller purple CCW
1 x 30° Camera Mount(For Runcam3/ for Gopro session)
1 x Pagoda antenna
2 x Battery strap
2 x Wrench
(Package doesn’t include Runcam 3, the Runcam 3 on the pictures for reference only.)

Additional information

Weight 0.745 kg

Related products

Eachine Wizard X220S FPV Racer RC Drone Omnibus F4 5.8G 40CH 30A Dshot600 2206 2300KV 800TVL CCD ARF
$219.99